MOTUL AUTOMATIC TRANSMISSION CLEAN este un produs de curățare pre-drenaj conceput spre utilizare în toate tipurile de transmisii automate: convenționale cu convertizoare de cuplu (AT), transmisie cu dublu ambreiaj (DCT) sau transmisie variabilă continuă (CVT) în cadrul operațiunilor de pregătire a schimbului de ulei. MOTUL AUTOMATIC TRANSMISSION CLEAN curăță în mod eficient depunerile (inclusiv a celor provenite din degradarea lubrifiantului) și reziduurile lichide localizate la nivelul componentelor transmisiei automate. Microparticulele îndepărtate sunt apoi evacuate în timpul procesului de scurgere a uleiului, lăsând transmisia complet curată. MOTUL AUTOMATIC TRANSMISSION CLEAN asigură gresarea perfectă pe toată durata procesului de curățare.

MOTUL AUTOMATIC TRANSMISSION CLEAN when added to the automatic transmission fluid before drain allows to:
• clean effectively and rapidly all types automatic transmission (AT, DCT, CVT) prior to oil change in order to take full advantage of all the qualities of the new oil following the drain
• dissolve deposits, sludge, varnish and residues built up in the transmissions and thus reduce wear for improved operation and increased durability of the transmission
• evacuate deposits, varnish and other residues from sensitive areas and components such as sensors, actuators, etc..., and hydraulic valves to ensure optimum operation of the automatic gearbox during shifting and to lower the fuel consumption

MOTUL AUTOMATIC TRANSMISSION CLEAN is highly effective and harmless on seals, joints, O-rings and mechanical components in order to increase the life duration of the transmission system.

MOTUL AUTOMATIC TRANSMISSION CLEAN is an automatic gearbox cleaner additive particularly adapted for use through an automated flushing machine part of the integral gearbox drain solution system MOTUL EVO, based on a fully automated machine for cleaning and draining of automatic transmissions.
MOTUL AUTOMATIC TRANSMISSION CLEAN can also be used in all similar devices for cleaning of automatic transmissions as available on the market.
In any case, always follow the manufacturer's instructions for the correct use of these machines.
Add to the automatic gearbox before changing the transmission fluid.
Run the engine approx. 15 minutes with frequent load changes (use all gear positions) according to manufacturer‘s instructions.
Change transmission fluid and filter according to manufacturer‘s instructions.
A dose of 300 ml is sufficient for 8 L automatic gearbox capacity. For larger capacities add 40 ml per liter of gear oil.
Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.

SECURITY:
Refer to the MSDS sheet and the information mentioned on the product label.