MOTUL ENGINE CLEAN este conceput pentru a fi utilizat în toate tipurile de motoare pe benzină și motorină, cu aspirare naturală sau turbocompresor, cu sau fără convertor catalitic, utilizând combustibili de orice natură. MOTUL ENGINE CLEAN curăță eficient murdăria depusă și elementele colmatate la nivelul motorului. Microparticulele îndepărtate sunt ulterior evacuate în momentul schimbului de ulei. MOTUL ENGINE CLEAN asigură o lubrifiere perfectă în timpul procesului de curățare.

MOTUL ENGINE CLEAN, added to engine oil before draining, allows to: • reduce the wear • decrease oil and fuel consumption • increase compressions on all cylinders in the same way • decrease exhaust pollutants emissions • evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston grooves and rings • take maximum benefit of fresh oil which will fill engine after draining • increase catalytic converter’s and DPF’s lifetime

Before each oil drain, add in the engine a can of ENGINE CLEAN to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter. The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments. Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very appreciable reduction of pollutants emissions to pass Vehicle Inspection. SECURITY Refer to the MSDS sheet and the information mentioned on the product label.