Được đặc biệt thiết kế cho thế hệ mới nhất của động cơ diesel “BlueTEC” với SCR (Hệ thống kiểm soát khí thải chủ động) từ tập đoàn DAIMLER (Mercedes), yêu cầu sản phẩm đạt tiêu chuẩn Mercedes-Benz MB 229.52, đảm bảo mức phát thải Euro 4, 5 hoặc 6. Sản phẩm cũng phù hợp với mọi động cơ diesel của Mercedes có bộ lọc hạt diesel (DPF) và một số động cơ xăng yêu cầu sử dụng dầu nhớt đạt tiêu chuẩn MB 229.51 hoặc MB 229.31. Với các động cơ cần sử dụng dầu nhớt Mercedes-Benz MB 229.5, chỉ sử dụng sản phẩm đạt tiêu chuẩn phê duyệt MB 229.5 như MOTUL 8100 X-cess 5W-40 hoặc MOTUL 8100 X-max 0W-40. Luôn tham khảo hướng dẫn sử dụng phương tiện trước khi dùng.

MERCEDES has developed MB 229.52 standard for oils able to endure the most severe thermal constrains along with most modern after treatment systems compatibility. The MB 229.52 standard applies to all MERCEDES vehicles equipped with “BlueTEC” Diesel engines fitted with SCR (Selective Catalyst Reduction) allowing NOx treatment through the use of AdBlue^® additive or so-called “Diesel Exhaust Fluid”.
MB 229.52 specification is also fully backward compatible with MB 229.51 and MB 229.31 specifications for all Mercedes Diesel engines with DPF and some Gasoline engines.
The exclusive technology of reduced Sulfated Ash levels and reduced Phosphorous and Sulfur contents protects and extends lifetime of after treatment systems such as SCR (Selective Catalyst Reduction) and Diesel Particulate Filter (DPF).
The 100% Synthetic base stock provides a high thermal stability and insures an exceptional resistance at high temperatures. Prevents from varnish and sludge to maintain engine cleanliness. Lower the risk of ring sticking.
Maximum protection and performance of the lubricant preserved even in the most severe conditions.
Low volatility for a reduced oil consumption and outstanding oxidation resistance of the oil to ensure extended oil drain intervals set by the carmaker.
Meets perfectly the highest demands of performance and durability validated by extensive testing.
Compared to other standards already very demanding such as MB 229.51, for its MB 229.52 standard, Mercedes requires oils able to cope with the most stringent oxidation resistance and thermal stresses and to be compatible with their aftertreatment systems.
MB 229.52 standard also requires improved cold flow properties to reduce hydrodynamic friction of the oil, in order to obtain fuel economy especially when the oil is cold. This extra requirement for cold flow properties allows excellent oil flow at start up, faster oil pressure build up, faster revs raisings and faster operating temperature reach. This type of lubricant allows fuel consumption reduction and therefore reduces greenhouse gases (CO₂) emissions.

Drain interval: refer to manufacturer’s recommendations and tune to your own use.
Do not mix with non MB 229.52 approved oils.
When in doubt, always refer to the vehicle owner’s manual.