MOTUL DOT 4
112835, 112833
Số lượng
Ứng dụngBrake fluids
Loại sản phẩmDOT
Chất lượngFULL SYNTHETIC
Description
Sử dụng cho hệ thống phanh dẫn động thủy lực và hệ thống ly hợp yêu cầu dầu nhớt đáp ứng tiêu chuẩn DOT 4 theo khuyến ng...
For hydraulic actuated brake and clutch systems
Sử dụng cho hệ thống phanh dẫn động thủy lực và hệ thống ly hợp yêu cầu dầu nhớt đáp ứng tiêu chuẩn DOT 4 theo khuyến nghị của nhà sản xuất.
Very good thermal resistance and stability:
MOTUL DOT 4 typical dry boiling point (243 °C / 469 °F) is superior to conventional fluids DOT 4 (230 °C / 446 °F mini), and therefore enables effective brake even under extreme conditions.
Security:
MOTUL DOT 4 typical wet boiling point (159 °C / 318 °F) is superior to conventional fluids DOT 4 (155 °C / 311 °F mini), and therefore enables longer use of the product. DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security.
The wet boiling point is representative for the fluid after one year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.
MOTUL DOT 4 typical dry boiling point (243 °C / 469 °F) is superior to conventional fluids DOT 4 (230 °C / 446 °F mini), and therefore enables effective brake even under extreme conditions.
Security:
MOTUL DOT 4 typical wet boiling point (159 °C / 318 °F) is superior to conventional fluids DOT 4 (155 °C / 311 °F mini), and therefore enables longer use of the product. DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduce their boiling points and consequently security.
The wet boiling point is representative for the fluid after one year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.
Mixable with DOT 3, DOT 4 and DOT 5.1 NON-SILICONE BASE products.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if in contact with skin, paint or varnish.
In case of skin contact, rinse thoroughly with water.
For safety advice, draining once a year is recommended.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if in contact with skin, paint or varnish.
In case of skin contact, rinse thoroughly with water.
For safety advice, draining once a year is recommended.
