MOTUL INUGEL EXPERT ULTRA
103703
Pojemność
ZastosowaniePłyn chłodzący
Rodzaj produktuINUGEL
JakośćOTHER
Poziom jakościGS 9400, 85T8-2, MB 325.0, MB 325.2, 9.55523, 18-1830, ESD-M97B49-A, 128 6083 / 002, 128 6083 / 002, 128 6083 / 002, QL 130100, 6901 599, JIC-501, TTM...
Opis
MOTUL INUGEL EXPERT ULTRA is a concentrated antifreeze that should be mixed with soft water for immediate use as a coola...
Concentrated antifreezeAnti-corrosion and antifreeze
MOTUL INUGEL EXPERT ULTRA is a concentrated antifreeze that should be mixed with soft water for immediate use as a coolant liquid, based on monoethyleneglycol, using an organic / non organic mix technology, named hybrid additives. This product can be mixed with all monoethyleneglycol based coolants.
Recommended for all cooling systems: passenger cars, heavy duty, construction and agriculture vehicles, gardening, ships, stationary engines …
Recommended for all cooling systems: passenger cars, heavy duty, construction and agriculture vehicles, gardening, ships, stationary engines …
Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful.
Protects the cooling system from freezing and metallic parts from corrosion.
Provides an excellent thermal exchange and therefore improves engine cooling efficiency.
Both silicates and organic acids provide anti-corrosion properties that remain while aging.
Seals, hoses, pipes and plastic parts friendly.
Protects the cooling system from freezing and metallic parts from corrosion.
Provides an excellent thermal exchange and therefore improves engine cooling efficiency.
Both silicates and organic acids provide anti-corrosion properties that remain while aging.
Seals, hoses, pipes and plastic parts friendly.
Do not use pure product. Mix with soft water according to the required freezing protection: refer to chart.
To maintain anti-corrosion properties, do not dilute below 33%.
Water for dilution: If possible use soft water: Maximum hardness 35 °F and chlorides and sulfates maximum contain 50 ppm.
Drain intervals: Refer to the manufacturers' recommendation.
This product should not be used to protect drinking water systems against freezing.
To maintain anti-corrosion properties, do not dilute below 33%.
Water for dilution: If possible use soft water: Maximum hardness 35 °F and chlorides and sulfates maximum contain 50 ppm.
Drain intervals: Refer to the manufacturers' recommendation.
This product should not be used to protect drinking water systems against freezing.