MOTUL ENGINE CLEAN +, when added to engine oil before draining, allows to: • reduce the wear • decrease oil and fuel consumption • increase compressions on all cylinders in the same way • decrease exhaust pollutants emissions • evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston grooves and rings • take maximum benefit of fresh oil which will fill engine after draining • increase catalytic converter’s and DPF’s lifetime

Before each oil drain, add in the engine a can of ENGINE CLEAN + to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter. One dose of 300 ml is sufficient to treat an engine oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE CLEAN + is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments. Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very appreciable reduction of pollutants emissions to pass Vehicle Inspection. SECURITY Refer to the MSDS sheet and the information mentioned on the product label.