MOTUL MOTYLGEAR LD 75W-80
106637
Quantity
ApplicationTransmission
Engine TypeManual
Product TypeMOTYLGEAR
Viscosity75W-80
API StandardsAPI GL-4
OEM ApprovalsMAN 341 Z-3, EATON Extended Drain, EATON Extended Drain, Eaton Extended Drain, RENAULT TRUCKS RVI, ZF TE-ML 02D, ZF TE-ML 02D, ZF TE-ML 02D
OEM PerformancesTransmission oil 97305, Transmission oil 97307
Description
Specially designed for heavily loaded mechanical transmissions and long drain service: EATON, MAN, RENAULT, VOLVO, ZF wi...
Gearbox lubricant
Specially designed for heavily loaded mechanical transmissions and long drain service: EATON, MAN, RENAULT, VOLVO, ZF with or without Intarder (Ecolite, Ecomid, Ecosplit) …
All gearboxes and gearbox/differential without limited slip system operating under moderate loads and revolution speed or transfer gearboxes, mechanical transmissions without hypoid gear, reduction gears operating under moderate to severe load and revolution speed.
All gearboxes and gearbox/differential without limited slip system operating under moderate loads and revolution speed or transfer gearboxes, mechanical transmissions without hypoid gear, reduction gears operating under moderate to severe load and revolution speed.
Technosynthese® “Extreme Pressure” lubricant for an efficient anti-wear protection, reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. "Long Drain - LD" formulation.
Stays in viscosity grade 80 after KRL 20 hours shear test as requested by SAE J306 standard.
Very high lubricating power which decreases friction and wear.
80 viscosity grade at high temperature reduces gearbox drag.
Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
Less effort required on the gear lever to shift the gears.
Suitable for any type of seal and yellow material used in gearboxes design.
Anti-corrosion, Anti-foam.
Stays in viscosity grade 80 after KRL 20 hours shear test as requested by SAE J306 standard.
Very high lubricating power which decreases friction and wear.
80 viscosity grade at high temperature reduces gearbox drag.
Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
Less effort required on the gear lever to shift the gears.
Suitable for any type of seal and yellow material used in gearboxes design.
Anti-corrosion, Anti-foam.
Oil change: According to manufacturers' requirements and adjust according to your own use.
