Petrol additive to be added directly in the fuel tank. Thanks to this additive, engine runs cleaner, creates less pollutants emissions, is more protected and offers higher performances. This product works as a contamination remover in the fuel system, cleaning from the tank to the combustion chamber. It will also dissolve resins and gums in carburetors and injection systems. It lubricates and protects the upper cylinder as well as it removes coking and unburned carbon residues. It binds moisture and condensed water throughout the whole fuel system and facilitates winter cold starts.

A clean fuel system is a necessary condition for an effective engine running.
MOTUL FUEL SYSTEM CLEAN allows to:
• clean the carburetors or the injectors (for a better atomization)
• prevent the formation of deposits and varnishes on inlet valves and in combustion chambers
• disperse condensation water in order to avoid any fuel system oxidation

A regular use will provide:
• optimum engine performances • fuel savings
• increased lifetime of fuel system and catalytic converter
• a reduction of exhaust pollutants emissions

Directly pour one can of FUEL SYSTEM CLEAN in the tank before refueling, regularly, depending on the use (shorten intervals in urban use). The fuel system will be then completely cleaned, from the tank to the combustion chamber.
A can of FUEL SYSTEM CLEAN is sufficient for tank capacity up to 60 liters. In case of bigger tank capacity, the recommended mixing ratio is 0.50% (200:1). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
Curative treatment: use the product pure by plugging on the fuel system with the adaptation kit.

SECURITY

Refer to the MSDS sheet and the information mentioned on the product label.