MOTUL DOT 4 LV - SKU 109434

MOTUL DOT 4 LV

109434
Quantity
ApplicationBrake fluids
Product TypeDOT
QualityFULL SYNTHETIC
Description

MOTUL DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitte...

Technical Data Sheet

Long life 100% Synthetic Brake Fluid

MOTUL DOT 4 LV (Low Viscosity) is especially recommended for use in hydraulic brake and clutch systems of vehicles fitted with ABS (Anti-lock Braking System), ESP (Electronic Stability Program) and ASR (Acceleration Slip Regulation) with a high boiling point and outstanding performance at very low temperatures.
STANDARDS: FMVSS 116 DOT 4, DOT 3 SAE J 1703, SAE J 1704 ISO 4925 (Classes 3, 4 & 6) RECOMMENDATIONS: ALPINE, AUDI, BMW, CITROËN, DACIA, DS, FORD, JAGUAR, LAND ROVER, MINI, MERCEDES, PEUGEOT, RENAULT, SEAT, SKODA, TOYOTA, VOLVO, VW … Long life fluid: MOTUL DOT 4 LV high wet boiling point (172 °C / 342 °F) is superior to conventional DOT 4 (155 °C / 311 °F mini) and conventional DOT 3 fluids (140 °C / 284 °F mini) and therefore enables longer product lifetime. Indeed, DOT 3, DOT 4 brake fluids have the property to absorb humidity contained in the air, which reduces their boiling points and consequently security. The wet boiling point is representative of the fluid after one year of use. Specially designed for ABS, ESP and ASR: The viscosity of MOTUL DOT 4 LV (675 mm²/s at -40 °C / -40 °F) lower than conventional DOT 4 (up to 1800 mm²/s), DOT 3 (up to 1500 mm²/s) and DOT 5.1 (up to 900 mm²/s) brake fluids allows an easier fluid circulation in micro-valves of anti-locking systems for better response of ABS, ESP and ASR high pressure systems. Perfectly neutral with seals used in braking systems. Anti-corrosion.
How to use image
Mixable with DOT 3, DOT 4 and DOT 5.1 NON-SILICONE BASE products. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to avoid absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. Drain Interval: 12 to 24 months as per manufacturers’ recommendations.

See more DOT products

View

You may also like